High pressure metering pump is not common in their daily things, only for the use of some special enterprises compared to the extensive, no matter what the product can do, only in the daily clean and maintenance, the use of in the future will work better, bring more benefits, the use of high pressure metering pump should pay attention to what it matters, the constant pump treasure for everyone.

First, the cleaning steps of high pressure metering pump:

1, check whether the parts have defects, deformation, there is a replacement;

2. Tap water for 5 minutes to test (if there is a crystallization environment, you can use crystal thinner for about 10 minutes, and then replaced with pure water for about 5 minutes);

3, sealing the high pressure metering pump power, remove all the valve parts (demolition must be aware of the dregs of drugs and moisture, to prevent damage or splash to the power supply and other related equipment deployment caused by infringement);

4. Flush the high pressure metering valve outside and inside the valve with clean water;

5, first hit the net water for about 10 minutes, and then playing for about 5 minutes, determine the tube water out, began to hold disassembly operations, in order to reduce the harm;

6. Install all the valves in accordance with the original condition;

Two, in cleaning high pressure metering pump, we need to prepare what things:

1, high pressure metering pump valve parts are plastic materials, dismantle, install, stop using things, so as to avoid damage to parts.

2. Please wear protective clothing (goggles, gloves, etc.) when performing clean operations