The powder feeding device is the use of high-speed hydraulic disperse agent or powder, increase the fineness, improve contact agent or silt and water infiltration area, reduce the dissolution time; equipment with three slots of overflow type combination, namely preparation, curing and dosing solution, produced by gravity and the proportion of poor solubility, automatic will have soluble and insoluble separation, stirring speed of agitator, improving the uniformity of solution, polymer solution preparation process is through the solution box gradually finished, separated from the solution tank, ensure the concentration of each solution in the reaction time and constant, avoid any direct path between the pre mixing tank and solution storage tank.

So, what's the use of the dry powder dosing device?

Powder feeding system of dry powder dosing device

A. storage hopper is made of stainless steel.

The top of the B. is equipped with vacuum suction machine.

The bottom of the C. is equipped with a shock device to prevent the reaction of the powder from bridging and the movement of the powder.

D. is equipped with a screw feeder, which can transfer the powder from the hopper to the mixing equipment.

The supply of E. supply is adjustable, and the material is stainless steel.

The main driving device of F. is a variable speed motor, the protection level is IP55.

The G. feeder is equipped with an anti condensation heater to avoid powder wetting and agglomeration.

Liquid level control system of dry powder dosing device

Five needle type electrode type liquid level meter:

Output signal: ultra high, high, medium and low signal

A. low liquid level: automatically start the whole system.

B. high liquid level: fully automatic stop the whole system.

C. ultra high liquid level alarm.